Monday, October 31, 2016

MEGA HOUNDOOM

This is the next requested item from a customer of mine on Etsy.  Mega Houndoom is the mega evolution of Houndoom when you have Houndoom is holding a Houndoominite during a battle.  This character was not easy to make.  I used floral wire in the tail so that I could recreate the tail tip pointing up just like the picture that I used to make Mega Houndoom.  I am going to put the floral wire in the instructions but if this is going to be made for a child, I recommend leaving it out.

MATERIALS:
Worsted Weight Yarn:  Black, gray, red, white, and carrot.
E crochet hook
Polyester Fiberfil
Tapestry needle
Floral wire

BODY:
Rd 1: With black, 9 sc in magic ring.  (9)
Rd 2: 2 sc in each sc around.  (18)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (27)
Rd 4: sc in next 5 sc, 2 sc in next sc, (sc in next 6 sc, 2 sc in next sc) 3 times.  (31)
Rd 5: sc in next 6 sc, 2 sc in next sc, (sc in next 5 sc, 2 sc in next sc) 4 times.  (36)
Rds 6-15: sc in each sc around.  (36)
Rd 16: sc in next 13 sc, (sc2tog, sc in next sc) 3 times, sc2tog, sc in next 12 sc.  (32)
Rds 17-18: sc in each sc around.  (32)
Rd 19: sc in next 11 sc, (sc2tog, sc in next sc) twice, sc2tog, sc in next 10 sc.  (29)
Rds 20-21: sc in each sc around.  (29)
Rd 22: sc in next 12 sc, sc2tog, sc in next sc, sc2tog, sc in next 12 sc.  (27)
Rds 23-24: sc in each sc around.  (27)
BEGIN STUFFING BODY AT THIS POINT.  CONTINUE STUFFING FIRMLY AS YOU GO.
Rd 25: (sc in next 7 sc, sc2tog) around.  (24)
Rds 26-27: sc in each sc around.  (24)
Rd 28: (sc in next 2 sc, sc2tog) around.  (18)
Rd 29: (sc in next sc, sc2tog) around.  (12)
Rd 30: sc2tog around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 30, pull tightly, and secure.  Weave in ends.

NECK:
Rd 1: With black, 8 sc in magic ring.  (8)
Rd 2: 2 sc in each sc around.  (16)
Rd 3: (sc in next 7 sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 8 sc, 2 sc in next sc) around.  (20)
Rds 5-14: sc in each sc around.  (20)
Rd 15: sc in next 9 sc, 2 dc in next 2 sc, sc in next 9 sc.  (22)
Rd 16: sc in next 10 sts, 2 dc in next 2 sts, sc in next 10 sts.  (24)
Rd 17: sc in next 11 sts, 2 dc in next 2 sts, sc in next 11 sts.  (26)
Finish off leaving a long tail.  Sew NECK to BODY adding stuffing before closing.

MUZZLE:
Rd 1: With carrot, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next 3 sc, 2 sc in next sc) around.  (15)
Rds 4-7: sc in each sc around.  (15)
Rd 8: sc in next 2 sc, 2 dc in next sc, dc in next sc, ch 2, dc in top of last dc, ch 2, slip st in top of first dc, sc in next 4 sc, ch 5, slip st in second ch from hook, sc in next 3 ch, sc in next 4 sc, dc in next sc, ch 2, dc in top of last dc, ch 2, slip st in top of first dc, dc in next sc, 2 dc in next sc, sc in next sc.
Finish off leaving a long tail.  Sew MUZZLE to NECK adding stuffing before closing.

HORNS (MAKE 2):
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rds 2-3: sc in each sc around.  (4)
Rd 4: (sc in next sc, 2 sc in next sc) around.  (6)
Rd 5: sc in next sc, sc2tog, sc in next sc, 2 sc in next 2 sc.  (7)
Rd 6: sc in next sc, sc2tog, sc in next sc, 2 sc in next 2 sc, sc in next sc.  (8)
Rds 7-9: sc in next sc, sc2tog, sc in next 2 sc, 2 sc in next sc, sc in next 2 sc.  (8)
Rd 10: sc in each sc around.  (8)
Rd 11: sc in next sc, 2 sc in next sc, sc in next 2 sc, sc2tog, sc in next 2 sc.  (8)
Rd 12: sc in next 2 sc, 2 sc in next sc, sc in next 2 sc, sc2tog, sc in next sc.  (8)
Rds 13-14: sc in next 3 sc, 2 sc in next sc, sc in next 2 sc, dc2tog.  (8)
Rd 15: dc in next 2 sts.
Finish off leaving a long tail.  Stuff HORNS firmly.  Sew HORNS to HEAD.

BELLY:
Rw 1: With carrot, ch 9, 2 sc in second ch from hook, sc in next 6 ch, 2 sc in next ch.  (10)
Rw 2: Ch 1, turn; sc in each sc across.  (10)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 8 sc, 2 sc in next sc.  (12)
Rw 4: Ch 1, turn; sc in each sc across.  (12)
Rw 5: Ch 1, turn; sc in next 5 sc, dc in next 2 sc, sc in next 5 sc.  (12)
Rws 6-8: Ch 1, turn; sc in next 3 sts, dc in next 6 sts, sc in next 3 sts.  (12)
Rws 9-24: Ch 1, turn; sc in each sc across.  (12)
Rw 25: Ch 1, turn; sc in next 5 sc, sc2tog, sc in next 5 sc.  (11)
Rw 26: Ch 1, turn; sc in each sc across.  (11)
Rw 27: Ch 1, turn; sc in next 5 sc, sc2tog, sc in next 4 sc.  (10)
Rw 28: Ch 1, turn; sc in each sc across.  (10)
Rw 29: Ch 1, turn; sc in next 4 sc, sc2tog, sc in next 4 sc.  (9)
Rw 30: Ch 1, turn; sc in each sc across.  (9)
Finish off leaving a long tail.  Sew BELLY to BODY.

FRONT LEGS (MAKE 2):
Rd 1: With black, 8 sc in magic ring.  (8)
Rd 2: 2 sc in each sc around.  (16)
Rds 3-4: sc in each sc around.  (16)
Rd 5: (sc2tog) 3 times, sc in next 10 sc.  (13)
Rd 6: (sc2tog) 3 times, sc in next 7 sc.  (10)
Rds 7-13: sc in each sc around.  (10)
Rd 14: sc in next 2 sc, 2 sc in next 2 sc, sc in next 6 sc.  (12)
Rd 15: sc in next 3 sc, 2 sc in next 2 sc, sc in next 7 sc.  (14)
Rd 16: sc in next 4 sc, 2 sc in next 2 sc, sc in next 6 sc, sc2tog.  (15)
Rd 17: sc2tog, sc in next 4 sc, 2 sc in next 2 sc, sc in next 7 sc.  (16)
Rds 18-21: sc in each sc around.  (16)
BEGIN STUFFING FRONT LEGS FIRMLY.  CONTINUE STUFFING FIRMLY AT BOTTOM  AND MEDIUM TO LIGHT AT TOP SO IT CAN BE FLATTENED.
Rd 22: sc in next sc, sc2tog, sc in next 6 sc, sc2tog, sc in next 5 sc.  (14)
Rd 23: sc in next sc, sc2tog, sc in next 5 sc, sc2tog, sc in next 4 sc.  (12)
Rd 24: sc2tog around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 24, pull tightly and secure.  Embroider red toe nails on FRONT LEGS.  Sew FRONT LEGS to BODY.

FRONT LEG BANDS (MAKE 4):
Rw 1: With gray, ch 15, sc in second ch from hook and in each ch across.  (14)
Finish off leaving a long tail.  Sew FRONT LEG BANDS to lower section of FRONT LEGS with a 1 sc gap between BAND ends and 2 Rd gap between BANDS.

HIND LEGS (MAKE 2):
Rd 1: With black, 8 sc in magic ring.  (8)
Rd 2: 2 sc in each sc around.  (16)
Rds 3-4: sc in each sc around.  (16)
Rd 5: (sc2tog) 3 times, sc in next 10 sc.  (13)
Rd 6: (sc2tog) 3 times, sc in next 7 sc.  (10)
Rds 7-13: sc in each sc around.  (10)
Rds 14-15: sc2tog, sc in next sc, 2 sc in next 2 sc, sc in next 3 sc, sc2tog.  (10)
Rds 16-17: sc2tog, sc in next 2 sc, 2 sc in next 2 sc, sc in next 2 sc, sc2tog.  (10)
Rd 18: 2 sc in next sc, sc in next 3 sc, 2 sc in next 2 sc, sc in next 3 sc, 2 sc in next sc.  (14)
Rd 19: (2 sc in next 2 sc, sc in next 5 sc) around.  (18)
Rds 20-23: sc in each sc around.  (18)
STUFF LOWER PORTION OF HIND LEGS FIRMLY AND UPPER PORTION OF HIND LEGS MODERATELY BECAUSE YOU NEED THE UPPER PORTION TO FLATTEN.
Rd 24: (sc in next 4 sc, sc2tog) around.  (15)
Rd 25: (sc in next 3 sc, sc2tog) around.  (12)
Rd 26: sc2tog around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 26, pull tightly and secure.  Embroider red toe nails on HIND LEGS.  Sew HIND LEGS to BODY.

NECK RING:
Rw 1: With gray, ch 31, sc in second ch from hook and in each ch across.  (30)
Finish off leaving a long tail.  Wrap NECK RING around NECK and together and to NECK.

LARGE BREASTPLATE TOOTH:
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rds 2-3: sc in each sc around.  (4)
Finish off.

SMALL BREASTPLATE TEETH (MAKE 2):
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Finish off when finishing the first SMALL BREASTPLATE TEETH.  Do not finish after make second SMALL BREASTPLATE TEETH.

BREASTPLATE:
Rd 1: sc in next sc on SMALL BREASTPLATE TOOTH 2, sc together the next sc of SMALL BREASTPLATE TOOTH 2 and the next sc on LARGE BREASTPLATE TOOTH, sc together the next sc of LARGE BREASTPLATE TOOTH and the next sc on SMALL BREASTPLATE TOOTH 1, sc in next 2 sc of SMALL BREASTPLATE TOOTH 1, sc together the next sc of SMALL BREASTPLATE TOOTH 1 and the next sc on LARGE BREASTPLATE TOOTH, sc together the next sc of LARGE BREASTPLATE TOOTH and the next sc on SMALL BREASTPLATE TOOTH 2, sc in next sc on SMALL BREASTPLATE TOOTH 2.  (8)
Rd 2: 2 sc in next sc, sc in next 2 sc, 2 sc in next 2 sc, sc in next 2 sc, 2 sc in next sc.  (12)
Rd 3: sc in each sc around.  (12)
Rd 4: (2 sc in next 2 sc, sc in next 4 sc) around.  (16)
Rd 5: sc in next sc, 2 sc in next 2 sc, sc in next 6 sc, 2 sc in next sc, sc in next 5 sc.  (20)
Rd 6: sc in each sc around.  (20)
Rd 7: sc in next sc, (sc2tog) twice, sc in next 6 sc, (sc2tog) twice, sc in next 5 sc.  (16)
Rd 8: [(sc2tog) twice, sc in next 4 sc] around.  (12)
Finish off leaving a long tail.  Stuff BREASTPLATE lightly so that the BREASTPLATE stays flat.  Sew BREASTPLATE to NECK RING.

LARGE BREASTPLATE SPIKES (MAKE 2):
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rd 4: sc in each sc around.  (6)
Rd 5: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rds 6-15: sc in each sc around.  (8)
Finish off leaving a long tail.  Stuff LARGE BREASTPLATE SPIKES firmly.  Sew LARGE BREASTPLATE SPIKES to BREASTPLATE.

SMALL BREASTPLATE SPIKES (MAKE 2):
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rds 4-12: sc in each sc around.  (6)
Finish off leaving a long tail.  Stuff SMALL BREATPLATE SPIKES firmly.  Sew SMALL BREASTPLATE SPIKES to BREASTPLATE.

MOUTH, TEETH, AND EYES:
Embroider MOUTH, TEETH, and EYES on MEGA HOUNDOOM.

TUCKS (MAKE 2):
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rd 4: sc in each sc around.  (6)
Rd 5: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rds 6-7: sc in next 2 sc, dc in next 4 sts, sc in next 2 sc.  (8)
Rds 8-9: sc in each sc around.  (8)
Rd 10: sc in next 3 sc, dc in next st, 2 dc in next 2 sts, dc in next st, sc in next st.  (10)
Rds 11-12: sc in next 3 sts, dc in next 6 sts, sc in next st.  (10)
Rd 13: sc in next 3 sts, dc in next 2 sts, 2 dc in next 2 sts, dc in next 2 sts, sc in next st.  (12)
Rd 14: sc in next 3 sts, dc in next 8 sts, dc in next st.  (12)
Rds 15-29: sc in each st around.  (12)
BEGIN STUFFING TUCKS AT THIS POINT.
Finish off leaving a long tail.  Sew open end of TUCKS together stuffing before closing..  Sew TUCKS to BODY.

SPINE BUMP #1:
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rd 4: sc in each sc around.  (6)
Rd 5: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rd 6: sc in each sc around.  (8)
Rd 7: (sc in next 3 sc, 2 sc in next sc) around.  (10)
Rds 8-23: sc in each sc around.  (10)
BEGIN STUFFING SPINE BUMP #1 LIGHTLY SO THAT IT FLATTENS AT CENTER.  CONTINUE STUFFING AS YOU GO ALONG.
Rd 24: (sc in next 3 sc, sc2tog) around.  (8)
Rd 25: sc in each sc around.  (8)
Rd 26: (sc in next 2 sc, sc2tog) around.  (6)
Rd 27: sc in each sc around.  (6)
Rd 28: (sc in next sc, sc2tog) around.  (4)
Rd 29: sc in each sc around.  (4)
Finish off leaving a long tail.  Weave tail through sc of Rd 29, pull tightly, and secure.  Sew SPINE BUMP #1 to BODY across back up against TUCKS.

SPINE BUMP #2:
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rd 4: sc in each sc around.  (6)
Rd 5: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rds 6-18: sc in each sc around.  (8)
BEGIN STUFFING SPINE BUMP #2 LIGHTLY SO THAT IT FLATTENS AT CENTER.  CONTINUE STUFFING AS YOU GO ALONG.
Rd 19: (sc in next 2 sc, sc2tog) around.  (6)
Rd 20: sc in each sc around.  (6)
Rd 21: (sc in next sc, sc2tog) around.  (4)
Rd 22: sc in each sc around.  (4)
Finish off leaving a long tail.  Weave tail through sc of Rd 22, pull tightly, and secure.  Sew SPINE BUMP #2 to BODY across back up against SPINE BUMP #1.

SPINE BUMP #3:
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rds 4-14: sc in each sc around.  (6)
BEGIN STUFFING SPINE BUMP #3 LIGHTLY SO THAT IT FLATTENS AT CENTER.  CONTINUE STUFFING AS YOU GO ALONG.
Rd 15: (sc in next sc, sc2tog) around.  (4)
Rd 16: sc in each sc around.  (4)
Finish off leaving a long tail.  Weave tail through sc of Rd 16, pull tightly and secure.  Sew SPINE BUMP #3 to BODY across back up against SPINE BUMP #2.

TAIL GRAY SPIKES (MAKE 3):
Rd 1: With gray, 8 sc in magic ring.  (8)
Rd 2: slip st in next sc, ch 3, slip st in second ch from hook, sc in next ch, sc in same sc as first slip, sc in next 7 sc.
Rd 3: sc2tog around.  (4)
Finish off leaving a long tail.  Sew the three TAIL GRAY SPIKES together.

TAIL:
Rw 1: With black, ch 21, working over floral wire, sc in second ch from hook and in each ch across.  (20)
Finish off leaving a long tail.  Pull tail through TAIL GRAY SPIKES and sew to BODY.

TAIL POINTS (MAKE 2):
Rw 1: With black, ch 8, sc2tog in second and third ch from hook, sc in next 5 ch.  (6)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, sc2tog.  (6)
Rw 3: Ch 1, turn; sc2tog, sc in next 3 sc, 2 sc in next sc.  (6)
Finish off leaving a long tail.  Sew TAIL POINTS to TAIL.

Mega Houndoom and Pokemon are copyright Nintendo.

This pattern is an original pattern by Christjan Bee (October 2016). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint it on your site. You may keep a copy for your own personal use but you may not sell or distribute it, or sell items made from this pattern.

No comments:

Post a Comment